NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual page 108

ProSafe Wireless-N Access Point WNAP210 Reference Manual
Table A-1. Access Point Default Configuration Settings (continued)
Feature
Lan IP
Subnet Mask
Gateway Address
DHCP Server
DHCP Client
Time Zone
Time Zone Adjusted for Daylight Saving
Time
SNMP
Spanning Tree Protocol
Secure Telnet
Wireless
Operating Mode
Access Point Name
Wireless Communication
11 b/g/n Wireless Network Name (SSID) NETGEAR_11ng
Broadcast Network Name SSID
Security
Transmission Speed
Country/Region
802.11gn Radio Frequency Channel
Output Power
Wireless Card Access List
WMM Support
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead, lower actual data throughput rate.
A-2
Description
192.168.0.236
255.255.255.0
0.0.0.0
Disabled
Disabled
USA-Pacific
Disabled
Enabled, but trap forwarding disabled
Disabled
Enabled
Access Point
netgearxxxxxx where xxxxxx are the last 6 digits of the
wireless access point MAC address.
Enabled
Enabled
Disabled
Best
a
Varies by region
Auto
Full
All wireless stations allowed
Enabled
Default Settings and Technical Specifications
v1.0 March 2009