Rear Panel - NETGEAR WNAP210 - ProSafe Wireless-N - Wireless Access Point Reference Manual
Wireless-n access point
Hide thumbs
Also See for WNAP210 - ProSafe Wireless-N - Wireless Access Point:
- User manual (82 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
Table 1-1. Front Panel LEDs (continued)
Item
LED DESCRIPTION
Ethernet LAN Speed
3
Off. A 10 Mbps or no link detected.
Amber. A 10/100 Mbps link detected.
Green. A 1000 Mbps link detected.
WLAN
4
Blinking (Blue). Indicates Wireless activity has been detected.
Rear Panel
Figure 1-2
The access pointrear panel functions are described in the following list:
1. Power socket. This socket connects to the WNAP210 12V 1.0A power adapter.
2. RJ-45 Ethernet port. Use the WNAP210 Ethernet RJ-45 port to connect to an Ethernet LAN
through a device such as a hub, switch, router, or PoE switch.
3. Restore factory settings button. The restore to settings button restores the access point to the
factory default settings.
Introduction
ProSafe Wireless-N Access Point WNAP210 Reference Manual
1
v1.0 March 2009
2
3
1-7
Advertisement
Table of Contents
