Configuring The Radius Server Settings - NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point Reference Manual

NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual

Configuring the RADIUS Server Settings

Use the following steps to view or change the RADIUS Server Settings:
1. Connect to the WAG302v2.
In the address field of your Web browser, enter the default LAN address of
http://192.168.0.230.
or log in by using the LAN address and password that you configured.
2. In the Security menu, click RADIUS Server Settings.
3. Enter the settings for the primary RADIUS server and secondary RADIUS server (if
available), and click Apply.
Figure 2-8
2-20
Log in with the user name of admin and default password of password,
v1.0, May 2006
Basic Installation and Configuration