Configuring The Radius Server Settings - NETGEAR WN802T Reference Manual

2. Make the required changes or selections to the Wireless LAN Parameters section, based on the
field descriptions outlined earlier.
3. Click Apply for your changes to take effect.

Configuring the RADIUS Server Settings

RADIUS (Remote Authentication Dial In User Service) is a protocol for managing
Authentication, Authorization and Accounting (AAA) of multiple users in a network. A RADIUS
server stores a database of user information, and can validate a user at the request of a gateway
device in the network when a user requests access to network resources. The wireless access point
can relay login information from wireless clients to an external RADIUS server for AAA services.
In an environment with many users, using a RADIUS server allows centralized control for
individual users, providing better network security than using a single preshared key for all users.
The RADIUS Server Settings fields are described in
To configure the RADIUS Server Settings:
1. Select Security under the main Configuration tab, then select Advanced from the side menu.
The Radius Server Settings screen displays, as in
Figure 4-10 RADIUS server settings
2. Enter the following RADIUS Server settings:
Management
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
v1.0, September 2008
Table 4-3.
Figure 4-10.
4-13