Configuring The Radius Server Settings - NETGEAR WG103 - ProSafe - Wireless Access Point Reference Manual

• VLAN ID. Enter the VLAN ID that is associated with this profile.
6. Click Apply to save your settings.

Configuring the RADIUS Server Settings

To view or change the RADIUS server settings:
1. Log in to the wireless access point at its default LAN address of http://192.168.0.229 with its
default user name of admin and default password of password, or using whatever password
and LAN address you have chosen for the wireless access point.
2. Select Configuration > Security > Advanced > Radius Server Settings. The Radius Server
Settings screen displays:
Figure 3-4
3. View or change the RADIUS server and authentication settings:
• Primary Authentication Server
Secondary Authentication Server
Primary Accounting Server
Secondary Accounting Server
Wireless Security
WG103 ProSafe 802.11g Wireless Access Point Reference Manual
v1.0, February 2009
3-9