AT&T MERLIN LEGEND Release 3.1 System Planning Manual page 382

Index
line compensation, 3-29
network selection table, 3-33
number to send, 3-34–3-35
options, 3-30–3-31
outgoing services, 3-32
outgoing tables, 3-33
overview, 3-27–3-28, 3-35
review by AT&T, 3-35
signaling mode, 3-29
Special Services Table, 3-33–3-34
Terminal Equipment Identifier (TEI), 3-35
test telephone number, 3-35
timers and counters, 3-35
type of service, 3-28
Principal user, 4-6–4-7
Privacy, 5-35
Programming
centralized, 4-2
equipment, 2-7
Extension Copy feature, 4-2–4-3
system, 4-2
Programming equipment, 2-7
Q
Queue over threshold, 4-14–4-15
Queued Call Console (QCC)
additional operator positions, 2-19–2-21
adjuncts, 4-3
call types, 4-18
Direct Station Selector (DSS) with, 4-16
features, 4-3–4-4, 4-13
identification information, 4-3
message center, 4-16
MFM adjunct features, 4-3
operator to receive calls, 3-14–3-15
optional features, 4-2
Position Busy Backup, 4-17
primary operator position, 2-18–2-19
queue priority, 3-15, 4-15, 4-25
Voice Announce, 4-18
R
Radio Frequency Interference (RFI), 1-5–1-6
Release 1.0, 3-21, 7-1, 7-2–7-4
Release 1.1, 3-21, 7-1, 7-2–7-4
Release 2.0, 3-4, 3-21, 7-1, 7-2–7-4
Release 2.1, 3-4, 7-1, 7-2–7-4
IN–8
System Planning
Release 3.0, 7-2–7-4
Release 4.0
forms, 7-4–7-6
upgrading to, 7-1, 7-2–7-4
Remote, 3-62
Remote access
barrier codes, 3-17–3-18
dial-in tie trunks, 3-17
Direct Inward Dial (DID) trunks, 3-17, 3-18, 3-38
modifying, 6-3
overview, 3-17–3-21
shared access, 3-19–3-20
slow dial tone and, 3-46
Remote Call Forward, 3-46, 4-6–4-7
forward delay option, 4-6
Renumbering
2-digit numbering plan, 2-27–2-28
3-digit numbering plan, 2-28–2-29
AUDIX Voice Power, 2-27
overview, 2-13
Set Up Space numbering plan, 2-30
Reports, 2-9–2-10
Resource groups
definition, 5-14–5-15
ISDN terminal adapter data-only, 5-14–5-15
modem, 5-14
modem-only, 5-14
Return ring, 4-17
Return time interval, 4-32
Ringing frequency
016 module, 2-25, 2-27
S
SA Ring, 5-30
Secondary dial tone timer, 2-12
and marked system speed dial, 2-12
Service Profile Identifier (SPID)
planning considerations, 3-41
planning form instructions, 3-42
Set Up Space numbering plan, 2-27, 2-30
Shared Access for Switched Services (SASS), 3-4
Signaling
Direct Inward Dial (DID) trunks), 3-39–3-40
Primary Rate Interface (PRI), 3-29
tie trunks), 3-36–3-37
Signaling mode
information, 3-31
T1 service, 3-23
Simultaneous voice and data, 2-21–2-22