Trunk-To-Trunk Transfer; Extension Copy - AT&T MERLIN LEGEND Release 3.1 System Planning Manual

Telephone and Extension Features

Trunk-to-Trunk Transfer

This section contains instructions to allow or disallow trunk-to-trunk transfer at
each extension.
Trunk-to-trunk transfer may only be performed on ground-start trunks and
loop-start trunks with reliable disconnect.
Trunk-to-trunk transfer may be disabled for a specific extension. Single-line
telephones are restricted from completing a trunk-to-trunk transfer.
Planning Form Instructions
Use Form 6b to identify extensions permitted to perform trunk-to-trunk transfers.
Under the Trunk-to-Trunk Transfer heading on Form 6b, do one of the following:
To block an extension from completing a trunk-to-trunk transfer, check
the No (factory setting) box.
To allow an extension to complete trunk-to-trunk transfers, check the Yes
box.

Extension Copy

The Extension Copy feature enables you to copy an extension's programmed
buttons (with some exceptions) to one or more extensions. The features are
individually programmed on one extension to create a template that can then be
copied to other extensions in the system. You can make additional copies of
these forms and have several templates for different groups of users.
Only similar types of extensions can be copied to each other (that is, analog to
analog and MLX to MLX) because both extension types have different button
layouts. For a system that has both telephone types, you would need at least
two templates, one for analog and one for MLX.
NOTE:
A Multi-Function Module (MFM) extension can be copied to or from another
MFM extension. An analog DLC extension can only be copied to another analog
DLC extension. An MLX DLC extension can only be copied to another MLX DLC
extension. Single-line telephones and QCCs cannot use the Extension Copy
feature.
Table 4 1 contains a list of the features that can be copied and whether the
features apply to analog telephones, MLX telephones, or both. Following the
table is a list of operator features that can be copied.
4–8
Features