AT&T MERLIN LEGEND Release 3.1 System Planning Manual page 380

Index
L
Labeling
display telephones, 4-45
extensions, 2-27
Posted Messages, 4-45–4-46
System Speed Dial, 4-46–4-47
Language selection, 2-9–2-10
Last Number Dial, 5-35
Line buttons
assigning to data stations, 5-33
data stations in Key mode, 5-33–5-34
personal, 5-30–5-31
Pool, 5-31
SA Ring, 5-30
Line coding
Primary Rate Interface (PRI), 3-28–3-29
T1 service, 3-23
Line compensation
settings, 3-24, 3-29
T1, 3-23–3-24
Line options planning
BRI Line Options, 3-40
Service Profile Identifier (SPID), 3-41
clock synchronization, 3-43
timers, 3-44
Lines/trunks
adding to the system, 6-6
assigning, 3-47–3-48, 5-32–5-33
AUDIX Voice Power, 3-12
capacity, 2-2
connecting components with, 2-4
data stations, 5-25–5-30, 5-26–5-27, 5-33
Direct Inward Dial (DID), 3-38–3-40, 5-27
DS1 connectivity, 3-21–3-22
hold disconnect interval, 3-14
identifying jacks, 3-2–3-3
incoming types, 3-6–3-8
jacks, 3-5–3-6
labels, 3-7
loop-start disconnect, 3-12–3-13
modules and jack types, 3-3–3-4
NI-1 BRI connectivity, 3-40
options, 3-11–3-12
outmode signaling, 3-13
planning overview, 3-1
pools, 3-15–3-17
Primary Rate Interface (PRI), 3-21
QCC operator to receive calls on, 3-14–3-15
QCC queue priority, 3-15
IN–6
System Planning
remote access, 3-18
required, 6-2–6-3
T1 service, 3-21, 3-22–3-30
T1 Switched 56 service, 3-26
telephone planning information, 1-6–1-7
tie, 3-35–3-38
toll type, 3-13–3-14
Local Area Networks (LANs)
host computer data stations, 5-25
workstation data stations, 5-1
Local host computer data stations, 5-23–5-24
Logical IDs, 2-4
Loop-start reliable disconnect, 3-12
trunk-to-trunk transfer, 3-12
Loop-start trunks
data stations, 5-26
disconnect signal, 3-12–3-13
Loudspeaker paging jacks, 3-9
LS-ID Delay, 3-4–3-5
M
Magic on Hold, 3-9
Maintenance Alarm jacks, 3-9
Marked system speed dial, 4-46
and star codes, 2-12, 4-46
Master extensions, 4-11
Megacom 800, 3-4, 3-22
Megacom WATS, 3-4
MERLIN II
012 module, 2-26
upgrading, 7-1–7-2
MERLIN MAIL voice messaging system, 2-25, 2-26
Message center, 4-16
Message-waiting receiver, 4-29
Microphone operation, 4-5–4-6
MLX telephones
as programming equipment (MLX-20L telephone), 2-7
assigning trunks, 3-47
button assignments in Hybrid/PBX mode, 3-49–3-50
button assignments in Key/Behind Switch mode, 3-54
Extension Copy feature, 4-8–4-12
features, 4-3
jacks, 2-22–2-24
language, 2-9–2-10
MFM adjuncts, 4-3
microphone operation, 4-5–4-6
modules, 2-14–2-15
Multi-Function Module (MFM) adjuncts, 3-47
optional features, 4-2