AT&T MERLIN LEGEND Release 3.1 System Planning Manual page 379

Index
G
General-Purpose Adapter (GPA), 5-30–5-31
analog multiline telephone connection, 2-24
data stations, 5-7
feature assignment, 5-34
requirement for, 6-3–6-4
Ground-start emulation, 3-4
Ground-start trunks
data station assignment, 5-26–5-27
emulation, 3-4
Grounding
approved, 1-4
requirements, 1-4–1-5
Group Calling
options, 4-28–4-31
overview, 4-25–4-28
Group channel assignments, 3-31
Group Cover button, 4-25
Group Coverage, 4-24–4-25
Group ID, 4-22
Group Name, 4-22
Group Number, 4-21
Group Paging, 4-21–4-22
H
Hold disconnect interval, 3-14
Hold return, 4-13–4-14
Hold timer, 4-12
Hunt type, 4-28
Hybrid/PBX mode
assigning buttons in, 3-48–3-53
Automatic Maintenance Busy, 2-10
buttons for data stations in, 5-1
calling restrictions, 4-4, 5-1
calling restrictions in, 4-47–4-61
setting up, 2-8–2-9
I
Idle Line Preference, 5-35
Integrated Administration
administering common entries, 2-25
loop-start disconnect and, 3-13
Night Service, 4-43, 4-44
Integrated Solution II (IS II), 2-25
Integrated Solution III (IS III), 2-25
Integrated Voice Power Automated Attendant, 2-25
Intercom Ring, 5-33
ISDN 7500B Data Module, 2-22
ISDN terminal adapter data stations
data-only, 5-11–5-12, 5-23
MLX voice and ISDN terminal adapter data, 5-10–5-11
overview, 5-9–5-12
ISDN terminal adapters, 5-3
resource groups, 5-14
J
Jacks, 3-8–3-10
additional operator positions, 2-19–2-21
analog multiline telephones, 2-24–2-25
applications, 2-25–2-27
assigning, 5-21–5-22
auxiliary equipment, 3-8–3-10
data communications, 5-21–5-22
data terminals, 2-22
extension, 2-21–2-22
extensions, 2-7
identifying for extensions, 2-14
lines/trunks, 3-2–3-3
MLX, 2-22–2-24
operator position maximum, 2-19–2-20
primary operator position, 2-18–2-19
system programming, 2-8
tip/ring (T/R) equipment, 2-25–2-27
type, 2-16
K
Key mode
assigning buttons in, 3-53–3-61
data stations, 5-33–5-34
FCC registration, 3-6
Permanent, 2-8–2-9
setting up, 2-8
IN–5
System Planning