AT&T MERLIN Attendant for MERLIN LEGEND Installer's Manual page 49

Programming Features of MERLIN Attendant
Table
2-2
Program
Code
2918 Extension Transfer
Indicates how extension calls are
transferred. If blind transfer (2) is
selected, calls are transferred to the
receptionist when an extension dialed
is busy or does not answer. If
supervised transfer (1) is selected,
callers hear the Transfer Fail
announcement when an extension
dialed is busy or does not answer.
9709 Lowest Extension
Identifies the lowest valid extension
number in the range available in the
system. Do not set for systems with
various numbers of extension digits.
(See "Extension Digits.")
9710 Highest Extension
Identifies the highest valid extension
number in the range available in your
system. Do not set for systems with
mixed numbers of extension digits.
(See "Extension Digits.")
You must enter the authorized caller mode before you can perform this
procedure (see "Entering the MERLIN Attendant Authorized Caller Mode").
Perform the following steps to change any of these Call Processing Options:
1. Dial followed by the appropriate "Program Code" as shown in Table
*
2-2.
2901 =
2902 =
2903 =
2904 =
2916 =
2918 =
Call Processing Options (Continued)
Option/
Description
Day Answer Delay
Night Answer Delay
Dialing Delay
Extension Delay
Extension Digits
Extension Transfer
Changing Call Processing Options
Default
Possible
Settings Settings
1 1 — 2
– –
– –
Current
Settings
2-17