Equipment And Location Requirements; Basic Telephone Module Ports - AT&T MERLIN Attendant for MERLIN LEGEND Installer's Manual

Installation and MERLIN LEGEND System Programming

Equipment and Location Requirements

The following equipment is supplied with the MERLIN Attendant:
power cord with transformer
8-foot, 6-wire modular phone cord
mounting plate
System Manager's Guide
Also required, but not supplied, is a 517C13 Basic Telephone (012) Module
housed in a MERLIN LEGEND system control unit. Up to four MERLIN
Attendants can be connected to the module.
When the maximum of four MERLIN Attendants is connected to the module,
only two basic telephones intended for call handling should be connected to
any of the remaining eight ports. However, when programming MERLIN
Attendant features, you can connect a basic Touch-Tone telephone to one of
the remaining eight ports to perform the programming procedures.
NOTE:
If a 400 w/dtmf module is present in the system, basic telephones maybe
connected to all available ports on the Basic Telephone (012) Module.
Table 1-3 shows the number of single-line sets that can be supported on one
BTM:
Table 1-3
No. of MERLIN Attendants
* Plus one single line set for MERLIN Attendant programming only
Basic Telephone Module Ports Usage
4
3
2
1
Equipment and Location Requirements
Additional Single-Line Sets
2*
3*
3*
4*
1-7