Connecting The Merlin Attendant - AT&T MERLIN Attendant for MERLIN LEGEND Installer's Manual

Installation and MERLIN LEGEND System Programming

Connecting the MERLIN Attendant

Follow the steps below to install the MERLIN Attendant:
CAUTION:
Before initial installation of the MERLIN Attendant, set switches 1 and
on the back panel to off (up).
1. Connect a basic Touch-Tone phone to the port on the Basic Telephone
(012) Module that you have programmed for the MERLIN Attendant.
2. Lift the handset.
Dial
3.
# 3 1
Attendant and the receptionist from answering a call at the same time.
4. Hang up the handset.
Repeat steps 1 through 4 for each MERLIN Attendant port.
5.
6. Place the MERLIN Attendant on a table or desktop or mount it using the
mounting bracket:
CAUTION:
To avoid internal damage and feature malfunction, do not stack
multiple MERLIN Attendants.
a. Using a #10 or smaller screw (wood, sheet metal, concrete), attach
the wall mounting bracket to a vertical wall surface so that the hook
end of the bracket is down.
b. Locate the keyhole opening on the underside of the MERLIN
Attendant with the hook on the bracket. Slide the unit over the hook
and down to secure.
1-18
Connecting the MERLIN Attendant
to turn on the Privacy feature to prevent the MERLIN
2