Assigning Calling Group Type - AT&T MERLIN Attendant for MERLIN LEGEND Installer's Manual

Installation and MERLIN LEGEND System Programming
delayed-ring option). This is applicable only if the system operator (and/or the
person at transfer redirect extension) is available to handle redirected calls.
All the lines appearing on all the attendant extensions must be programmed to
appear on the Night Service extensions.

Assigning Calling Group Type

Use this procedure to assign the calling group you created to the Generic
group type. The system automatically logs in group members assigned to the
Generic VMI group type following a power failure. This procedure starts from
the System Programming Menu.
Step
1. Select Group Calling
2. Select Group Type
3. Identify calling group you want to
program for Group Type
If you plan to program more
than one group, enter lowest
extension number.
Save your entry
4. Select Generic VMI Group
Save your entry
5. Exit System Programming and
return to normal call handling
MLX-20L
Extensions
[More]
GrpCalling
[More]
GroupType
Dial the calling
group extension
number: [nnn] or
press [DSS] for
group extension
number you want
Enter
Generic VMI
Enter
[Home]
System Programming Procedures
VMI
PC
[F6]
[PgUp]
[F4]
[PgUp]
[F1]
Type calling
group extension
number:
[nnn]
[F10]
[F3]
[F10]
[Home]
1-17