Startup Procedures - AT&T Merlin II Feature Module 2 System Manual

Startup Procedures

5-8 Startup Procedures
To activate CMS, follow these steps:
1 Turn on your PC.
If you use an AUTOEXEC.BAT file to automatically start the CMS
program, the CMS Menu appears. Go to step 4. (For informatiom on
creating an AUTOEXEC.BAT file, refer to "Starting up the CMS Program
Automatically" in Section 3.)
2 When the C> prompt appears, type cd cms and press
3 When C> prompt appears again, type cms and press
the CMS program. The CMS Main Menu, below, appears.
Bon Voyage Travel
C A L L M A N A G E M E N T
F O R
( c ) 1 9 8 6 ,
F1 - Start Call Management
F4 - Administer CMS
F5 - Print Reports
F8 - Exit to DOS
F S t a r t
1 Call Mgt
4 Press (labeled "Start Call Mgt" ) to begin call management. If you
[ F1 ]
have not preselected a shift configuration, the Initialization screen (below)
appears with a list of configurations and a prompt.
S Y S T E M
T H E M E R L I N ( r )
1 9 8 7 , 1 9 8 8 ,
MAIN MENU
(Agents, Lines, Configurations)
F Admin F P r i n t
4 CMS
5 Reports
.
[ ]
.This starts
[ ]
CMS CMSIIR2 2:03p
( C M S )
I I C S
b y A T & T
F 1 0 - Help
F E x i t
8 to Dos
06/27