AT&T Merlin II Feature Module 2 System Manual page 24

SET THE TIME
3-8 Installing the CMS Software
To check or change the time on your PC, do as follows:
1 When the C> prompt appears, type
time
and press . The following message appears on your screen:
[ ]
Current time is 0:01:30.00
Enter new time:
2 If the time is correct, press
If the time is incorrect, type in the correct hour and minute (for example,
9:03 ) and press
[
if you want to enter the time as 2:30 p.m. you must type 14:30.
MS-DOS keeps track of the seconds and hundredths of seconds for you.
.
[ ]
. MS-DOS works on the basis of a 24-hour clock, so
]