AT&T Merlin II Feature Module 2 System Manual page 172

ERROR—No Configuration Found. ADMINISTER System.
Effect on Call Management: Until this problem is corrected, CMS cannot manage
calls, See "Managing Calls if CMS is Disabled" at the end of this section of
the manual.
Possible cause
You omitted one or
more steps when you
built your shift
configurations.
ERROR—CMS Card Faulty or Not Found. CMS Cannot Manage Calls.
Effect on Call Management: Until this problem is corrected, CMS cannot
manage calls. See "Managing Calls if CMS is Disabled" at the end of this
section of the manual.
Possible cause
The CMS card is
installed incorrectly.
The CMS card is faulty.
Corrective action
1 In sequence, press
[ F8
get the Stored Shift Configurations screen.
2 Build at least one shift configuration
according to the instructions in "Building
or Editing Shift Configurations" in Section
4 .
3 Restart CMS.
Corrective action
1 Press twice to exit to MS-DOS.
[ F8 ]
2 Turn off and disconnect the PC.
3 Make sure the CMS card is installed as
described in the lnstallation and Getting
Started Guide for the Call Management
System.
4 Reconnect and turn on the PC.
5 Restart CMS.
If the same message appears when you restart
CMS, you may have a faulty CMS card.
Contact your equipment supplier for
assistance.
] , , and to
[ F4 ] [ F1 ]
Startup Problems 9-3