AT&T Merlin II Feature Module 2 System Manual page 77

4-48 Backing Up Shift Configurations
If you ever lose a shift configuration (for instance, if you clear a configuration
by accident), copy the desired configuration (or all configurations) from the
duplicate as follows:
1 Repeat steps 1 through 3 in the previous procedure.
2 To copy all your shift configurations from the duplicate onto the hard
disk, type
copy a:shift .cms c:
To copy a single shift configuration from the duplicate, type
copy a:shiftX. cms c:
(Replace X with the number of the shift configuration.)
3 To copy the system tables from the duplicate copy onto the hard disk,
type
copy a:systbls.cms c:
4 Remove the duplicate when the red light on disk
For more information on restoring CMS after system
"Troubleshooting."
drive C goes out.
problems, see Section 9,