Activating And Suspending Enhanced Night Service With Time Set - AT&T MERLIN 3070 Administration Manual

94
5. If you have a printer and want to see a list of the times you've set for Night Ser-
vice to go on and off, go on to step 7. If you don't need to see a printout and are
ready to start automatic operation of Night Service at this time, go on to step 6.
6. Start the automatic operation of Night Service by dialing the 4-character code #313
and the number of the current day of the week (Sunday is 0; Saturday is 6).
For example, if today is Tuesday, you dial the 5-character code #3132 to activate
Night Service with Time Set.
Go on to step 8.
7. To get a printout of the Night Service Information Report, which lists the times
Night Service is set to go on and off each day of the week, dial the 4-character
code #907.
The green light next to Adm Misc flashes. When the printout is completed,
you hear a beep and the green light next to Adm Misc becomes steady.
Don't go on to step 8 until you hear a beep or you will get an incomplete printout.
Wait to remove your printout until you have completed step 8 or your page
alignments will be affected.
8. Touch Adm Misc.
The lights next to the administration buttons flash again.
9. Continue to administer your system, or leave administration mode by following
the boxed instructions on page 28.

Activating and Suspending Enhanced Night Service With Time Set

Once you've set the times when you want the system to turn Night Service on and
off each day, you can enter administration mode and activate or suspend Night Ser-
vice with Time Set to suit the operating schedule of your business. Follow the pro-
cedure below to put Night Service with Time Set in place or to remove it temporarily.
1. If you haven't already done so, enter administration mode by following the
boxed instructions on page 28.
2. Touch Adm Misc.
The lights next to the administration mode buttons stop flashing, and the gren
light next to Adm Misc becomes steady.
3. To change the status of Night Service with Time Set, perform one of the operations
shown below. Keep in mind that if you set or change the current day
of the week while Night Service is on, it will go off.
• To activate timer-controlled operation of Night Service, dial the 5-
character code shown below for the current day of the week.
Sunday = #3130
Monday = #3131
Tuesday = #3132
• To suspend timer-controlled operation of Night Service, dial the
5-character code #3139
If you suspend Night Service with Time Set, you must turn Night Service on
and off manually. To reestablish timer control of Night Service, just follow
the instructions given above for activating Night Service with Time Set.
4. Touch Adm Misc.
The lights next to the administration buttons flash again.
5. Continue to administer your system, or leave administration mode by following
the boxed instructions on page 28.
Wednesday = #3133
Thursday = #3134 Saturday = #3136
Friday = #3135