AT&T MERLIN 3070 Administration Manual page 15

Administrator/Attendant Consoles for
Small Systems* in Administration Mode
1. T/P switch: Set to P when performing system
administration.
2. Adm Tel button: Used when assigning lines to
voice terminals and assigning voice terminals Dial
Access to Line Pools.
3. Adm Pool button: Used when setting up line pools.
4. Line buttons.
5. Auto Intercom buttons (10 through 29).
6. Adm Mist button: Used when specifying Touch-
Tone or rotary signaling, assigning allowed-list call
restrictions, and administering other system options.
12
7. Call Rstr button: Used when setting lines to detect
a toll prefix or area code only and when assigning
outward and toll call restrictions.
8. Message button: Used when giving a voice ter-
minal the same assignments as one that has already
been administered.
9. Conference button: Used to assign features to in-
dividual voice terminals from the administrator/
attendant console.
*Systems with 8 or fewer lines and 20 or fewer voice
terminals — switch H on control unit is up.