AT&T MERLIN 3070 Administration Manual page 151

M.
Enhanced Night Service with Outward Restriction
If your system will prevent unauthorized after-hours use of your business'
telephones, you need to assign telephone numbers to the Emergency
Allowed List and you also must decide on a password. (There is space
to fill in your password, but you probably do not want the password to be
public knowledge.) On the Emergency Allowed List Table, page 163, fill
in the telephone numbers that will be accessible during Enhanced Night
Service with Outward Restriction, such as local police and fire depart-
ments and ambulance services. You may establish up to ten entries with
a maximum of twelve digits per entry.
You may decide that certain voice terminals should be excluded from
Enhanced Night Service with Outward Restriction. List the voice terminals
that will be excluded on the Night Service Exclusion List found on the Night
Service Outward Restriction Directory, page 163. (For a more detailed ex-
planation, see page 90.)
N.
Enhanced Night Service with Time Set
If you want your system to turn Night Service on and off automatically,
you need to assign the times when Night Service is to be turned on and
off. You must have an SMDR module to use this feature. On the Enhanced
Night Service with Time Set Table, on page 164, fill in the times for each
day, when Night Service will automatically go on and off. (For a more
detailed explanation, see page 94.)
O .
Station Message Detail Recording (SMDR Options)
If your system will use SMDR (Station Message Detail Recording) to keep
a record of calls, fill in the minimum duration of calls to be recorded on
the System Configuration Form. (If you don't specify a minimum call
length, the system doesn't record calls that last less than 1 minute.) If you
want to record all calls, enter "0." Also indicate whether or not the system
should record incoming calls.
P
System Speed Dial Numbers
If you want to store numbers that anyone in your business can dial using
a 3-character code, fill in these numbers on the System Speed Dial Direc-
tory, page 165. You can associate up to 40 digits and special characters,
including pause (p), recall (r), and Touch-Tone Enable (t), with each System
Speed Dial code. Remember to enter an asterisk (the asterisk counts as
a digit) at the end of your marked Speed Dial code telephone numbers.
(For a more detailed explanation, see page 96.)
Q.
Group Page Groups
If you plan to use the Group Page feature, which allows people to receive
paging messages through their voice terminal speakers, you need to
assign intercom numbers to Group Page groups. On the Group Page
Directory, page 166, fill in the intercom numbers and names of people
designated for each group. You may establish up to seven groups, each
covering a maximum often people. Voice terminals can belong to more
than one group. (For a more detailed explanation, see page 79.)
148