AT&T MERLIN 3070 Administration Manual page 141

Fixed Features (continued)
Feature
Monitor-on-Hold
Speaker
On-Hook Dialing
Speaker
Recall
Ringing Line Selection
Send Message
Transfer
Transfer Return
Voice Terminal
Programming
Voice Terminal Testing
Volume Control
138
Use your voice terminal's speaker to listen for a caller to return when you've been put on hold.
• Frees you to do other work when you've been put on hold.
Turn on the speaker and dial an outside or intercom call without lifting the handset.
Touch Recall instead of pressing the switchhook to access PBX, Centrex, or Custom Call-
ing features. If your MERLIN system isn't connected to a PBX or Centrex system, and if you
aren't using a Custom Calling feature, use Recall to disconnect a call without hanging up
your handset.
Answer a call without touching any buttons because your MERLIN system automatically
selects the ringing line when a call comes in.
If you're an attendant, notify a person that a message is waiting by touching Send Message.
Pass outside calls to any voice terminal in your MERLIN system. Transfer calls with or without
an intercom announcement.
• Attendants can screen calls on intercom as part of transfer.
Hear unanswered transferred calls ring again at the voice terminal from which they were
transferred.
• Transferred calls are not lost.
• The attendant can tell from which voice terminal a transferred call is returning.
Program voice terminals with custom features according to business and individual needs.
Determine whether all lights and ringing mechanisms are working by sliding the T/P switch
on the left side of the voice terminal to the T position.
Adjust the sound level of a voice terminal's ring and speaker.
Description