AT&T MERLIN 3070 Administration Manual page 94

With feature module 5
Hide thumbs Also See for MERLIN 3070:
Table of Contents

Advertisement

4. To administer an allowed list of emergency telephone numbers, dial the 4-character code
then perform one of the following operations:
• To add or change an emergency telephone number, dial the netry number (0 to 9) of the
telephone number on the allowed list, then dial the number itself (maximum of 12 digits).
For example, if the first entry on your allowed list were 861-5000, the number of your local
fire department, you would dial #310, then dial 08615000.
• To remove an existing emergency telephone number, dail the netry number (0 to 9) of the
telephone number on the allowed list, then touch Drop.
5. Repeat step 4 for each emergency number you want to add, change, or remove from
your allowed list.
6. To assign voice terminals to the Night Service Exclusion list or remove them from this list,
dial the 4-character code #308, then touch the Auto Intercom button of each voice terminal
until the light next to the button shows the appropriate code.
NOTE: Voice terminals on the Night Service Exclusion list retain the calll restrictions, if
any, places on them during normal working hours. They are not protected in any other way from unauthorized
use while Night Service with Outward Restriction is in effect.
Green light on = voice terminal is assigned to the Exclusion list.
Green light off = voice terminal is not assigned to the Exclusion list.
If you don't have an Auto Intercom button for a voice terminal, use your dial pad to add it to
or remove it from the Exclusion list.
• To add a voice terminal to the list, touch Hold,
• To remove a voice terminal to the list, touch Drop, then dial its intercom number.
• To remove all the voice terminals from the list, touch D r o p , t h e n t o u c h
When you use Hold and Drop, the console will beep if you try to add a voice terminal that is
already on the list or to remove a voice terminal that is not on the list.
7. If you have a printer, you can get a Night Service Information Report showing the Night Service pass-
word, the allowed list of emergency telephone numbers, and the Exclusion list, if ou have one. A typical
printout appears on page 88. To get a printout, dial the 4-character code #907
The green light next to Adm Misc flashes.
and the green light next to Adm Misc becomes steady.
Don't go on to step 8 until your hear the beep or you will get an incomplete printout. Wait to
remove your printout until you have completed step 8 or your page alignments will be affected.
8. Touch Adm Misc.
The lights next to the administration mode buttons flash again.
9. Continue to administer your system, or have administration mode by following the boxed instructions
on page 28.
then dial its intercom number.
When the printout is completed, you hear a beep
.
91

Advertisement

Table of Contents
loading

This manual is also suitable for:

Merlin 1030

Table of Contents