Triton T1 Configuration - Triton T1/Pri/E1 Dialog Box - Altigen AltiWare OE/ACC Version 5.0 Administration Manual

Configuring the Triton T1/E1/PRI Board
• The Span Info window displays the Total Number of Spans on the
board and the status of the span in the Span Info window. To reset the
span, click the Reset Span button. Double clicking a span in this
window will invoke a configuration window, as discussed in the
following section.
See "T1 Clocking" on page 6-47 and the Status Messages table beginning
in the next section.

Triton T1 Configuration - Triton T1/PRI/E1 Dialog Box

Double clicking the span line for a Triton T1 board in the Span Info
window invokes a T1/PRI Configuration dialog box.
Figure 18. Triton T1/PRI Configuration dialog box
6-42 AltiWare OE System Installation & Administration Manual