Triton T1/Pri Trunk Properties - Altigen AltiWare OE/ACC Version 5.0 Administration Manual

Triton T1/PRI Trunk Properties

To configure a Triton T1/PRI channel, select a Triton T1/PRI channel from
the trunk channels list in the Trunk Configuration window, then click the
Trunk Properties button or double-click the list entry to view the Triton
T1/PRI Trunk Line Properties dialog box.
Figure 7. Triton T1 Configuration dialog box
The following are the parameters for the Triton T1 Configuration dialog
box:
Parameter
T1 robbed-bit signaling
AltiWare OE System Installation & Administration Manual
Description
Trunk Configuration
7-17