Triton T1 Configuration - Triton T1/Pri Dialog Box - Altigen AltiWare OE Release 4.0 Administration Manual

Board Configuration
This dialog box displays the board serial number and allows you to
reconfigure the Clock Frequency, Digit Duration, and the Firmware File
Name. You can also choose to dump a Channel State after selecting the
channel in the drop down list.
Span Info: displays the Total Number of Spans on the board and the
status of the span in the Span Info window. To reset the span, click the
Reset Span button. Double clicking a span in this window will invoke a
configuration window, as discussed in the following section.
See "T1 Clocking" on page 64 and the Status Messages table beginning on
the next page.

Triton T1 Configuration - Triton T1/PRI Dialog Box

Double clicking the span line for a Triton T1 board in the Span Info
window invokes a Triton T1 Configuration - Triton T1/PRI dialog box.
Figure 22. Triton T1 Configuration - Triton T1/PRI dialog box
60 AltiWare OE System Administration Manual