Altigen AltiWare OE/ACC Version 5.0 Administration Manual page 237

For each class, select the type of number/numbering plan from the drop-
down list:
• Type of Number:
— Unknown
— International
— National
— Network Specific
— Subscriber Number
• Numbering Plan:
— Unknown
— ISDN
— National
— Private
The setting 'Unknown' is used when the user or network has no knowledge
of the numbering plan. In this case, the number digits field is organized
according to the network dialing plan.
B Channel Maintenance Message:
Select the maintenance message that will delivered on the B Channel:
— None
— Restart
— Service
— Restart and Service
• Enable PRI Caller Name - check this box to enable PRI caller name
Setting the NSF
The NSF (Network-Specific Facilities) is used with PRI to instruct the CO
to route a call to a specific carrier or long distance service. Use the drop-
down list to identify the type of carrier service you wish to use for your
ISDN PRI lines.
The choices in the list depend on the specific switch and your long distance
service provider. An example of such service includes AT&T Megacom.
AltiWare OE System Installation & Administration Manual
Board Configuration
6-53