Establishing Basic Extension Attributes - Altigen AltiWare OE/ACC Version 5.0 Administration Manual

Setting up Extensions
"Setting a System Number Plan" on page 5-4.
3. Select the Type of extension from the options—Physical, Virtual, or
Huntgroup. The Workgroup option is enabled with the ACC
License.
Note: See the discussion of the different extension types on page 10-
1. Note also that after the extension is created, you can change
Virtual extensions to Physical, and vice versa, but you cannot
change Physical or Virtual to Group or vice versa.
The Physical Extension License displays the maximum number of
physical channels licensed to the user as well as the number of
assigned, licensed physical channels.
4. Depending on the type of extension you're creating, take one of the
following actions:
• If you're setting a virtual or group number, you're done. Click OK.
• If you're setting up a physical extension, select an available
physical location—slot and channel for the line—then click OK.
The slots (logical board ID) and the channels (the ports) are dis-
played and available if they have not yet been assigned to an exten-
sion.

Establishing Basic Extension Attributes

After you create an extension, you can set other basic attributes in the
Extension Configuration General window:
To set the Personal Information:
Type in the User Name, Password, DID, Tenant Group, and optional
Description:
• First Name and Last Name of the extension user, each with a
maximum of 32 characters.
• Password for the extension user. The default is the system default
password set on the Number Plan tab of the System Configuration
window.
A valid password cannot be the same as its extension number and must
be 4–8 digits (numbers or letters A–Z) in length. Basic password
patterns, such as repeated digits (1111), consecutive digit strings
(1234), or digits that match the extension (Ext. 101 using 1012, 9101,
10-6 AltiWare OE System Installation & Administration Manual