Where To Go Next - Cisco CRS-1 - Carrier Routing System Router Migration Manual

Chapter 1 Migrating to a Cisco CRS-3 Carrier Routing System
RP/0/RP1/CPU0:router(admin-config)# no controllers fabric rack 1 install-mode
RP/0/RP1/CPU0:router(admin-config)# commit
RP/0/RP1/CPU0:router(admin-config)# do show controllers rack-status all detail
Rack
Num
----
0
1
F0

Where to Go Next

When all fabric planes on both LCCs are migrated, configured and connected to the FCCs, see
Cisco IOS XR Getting Started Guide for information on general system setup and operation.
If you need to downgrade your Cisco CRS-3 Carrier Routing System 16-Slot Line Card Chassis back to
a Cisco CRS-1 Carrier Routing System 16-Slot Line Card Chassis, see
Integrated Switch System."
For this release use the Turbo boot procedure described in Appendix A to downgrade the system before swapping
out the fabric to downgrade your Cisco CRS-3 Carrier Routing System Router back to a Cisco CRS-1 Carrier Routing
System Router.
OL-13669-03
Rack Server
Status Status
------ ------
NORMAL PRESENT
NORMAL PRESENT
NORMAL PRESENT
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
Where to Go Next
Chapter 2, "Converting to an
1-85