Cisco CRS-1 - Carrier Routing System Router Migration Manual page 177

Chapter 3 Cisco CRS-3 Carrier Routing System Router Command Changes
show controllers egressq group ntb
To display the negative token bucket (NTB) limit table information of the egress queue manager, use the
show controllers egressq group ntb command in EXEC mode.
Syntax Description
max
min
location node-id
Defaults No default behavior or values.
Command Modes EXEC
Command History Release
Release 4.0.0.T
Release 4.0.1
Release 4.0.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. If you suspect user group assignment is preventing you from using a command, contact your
AAA administrator.
Task ID Task ID
drivers
Examples
The following example shows how to use the show controllers egressq group ntb command:
RP/0/RP0/CPU0:router# show controllers egressq group ntb max location 0/6/cpu0
Group Max Negative TB Limit Table
----------------------------------
Index | Value (bytes)
OL-13669-03
show controllers egressq group ntb {min | max} location node-id
Modification
This command was introduced.
No modification.
No modification.
Operations
read
0 | 76800
1 | 153600
2 | 230400
3 | 307200
4 | 384000
5 | 460800
6 | 537600
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
Maximum limit of the DRR profile table.
Minimum limit of the DRR profile table.
Egress queue manager location.The node-id argument is entered in
the rack/slot/module notation.
show controllers egressq group ntb
3-17