Cisco CRS-1 - Carrier Routing System Router Migration Manual page 189

Chapter 3 Cisco CRS-3 Carrier Routing System Router Command Changes
show controllers (Ethernet)
To display status and configuration information about the Ethernet interfaces on a specific node, use the
show controllers command in EXEC mode.
Syntax Description {GigabitEthernet
|HundredGigE |
TenGigE }
interface-path-id
all
bert
control
internal
mac
phy
regs
stats
xgxs
Command Default
No default behavior or values
Command Modes EXEC
Command History Release
Release 3.0
Release 3.5.0
Release 4.0.0.T
Release 4.0.1
OL-13669-03
show controllers {GigabitEthernet | HundredGigE | TenGigE} interface-path-id [all | bert |
control | internal | mac | phy | regs | stats | xgxs]
Indicates the type of Ethernet interface whose status and configuration infor-
mation you want to display. Enter GigabitEthernet, HundredGigE,
TenGigE.
Physical interface or virtual interface.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
Displays detailed information for the specified interface.
Displays BERT status information for the interface.
Note
Displays configuration and control information for the interface.
Displays internal information for the interface.
Displays mac information for the interface.
Displays physical information for the interface.
Displays register information for the interface.
Displays statistical information for the interface.
Displays information about the 10 Gigabit Ethernet Extended Sublayer
(XGXS).
Modification
This command was first introduced on the Cisco CRS Router.
Added GigabitEthernet and TenGigE keywords and support.
This command was first introduced on the Cisco CRS-3.
Added HundredGigE keyword and support on the Cisco CRS-3.
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
Not supported on the Cisco CRS 14-Port or Cisco CRS 20-Port
10-Gigabit Ethernet LAN/WAN-PHY Interface Module.
show controllers (Ethernet)
3-29