Cisco CRS-1 - Carrier Routing System Router Migration Manual page 143

Chapter 2 Downgrading Your Cisco CRS-3 Carrier Routing System Router Back to a Cisco CRS-1 Carrier Routing
System Router
This section describes how to remove a CRS-3 fabric card from the Cisco CRS Fabric Card Chassis. For
more detailed information on the CRS-3 fabric card, see Cisco CRS Carrier Routing System 4-Slot Line
Card Chassis System Description.
Class 1M laser radiation when open. Do not view directly with optical instruments. Statement 281
Caution
For diverging beams, viewing the laser output with certain optical instruments within a distance of
Warning
100 mm may pose an eye hazard. For collimated beams, viewing the laser output with certain optical
instruments designed for use at a distance may pose an eye hazard. Statement 282
Warning Laser radiation. Do not view directly with optical instruments. Class 1M laser product. Statement 283
OL-13669-03
Downgrading your Cisco CRS-3 Carrier Routing System 4-Slot Line Card Chassis Back to a Cisco CRS-1 Carrier
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
Routing System 4-Slot Line Card Chassis
2-45