Cisco CRS-1 - Carrier Routing System Router Migration Manual page 34

Carrier routing system
Hide thumbs Also See for CRS-1 - Carrier Routing System Router:
Table of Contents

Advertisement

How to Migrate to a Cisco CRS-3 Carrier Routing System (16-Slot)
2.
3.
4.
5.
6.
7.
DETAILED STEPS
Command or Action
Step 1
admin
Example:
RP/0/RP0/CPU0:router#admin
Step 2
configure
Example:
RP/0/RP1/CPU0:router(admin)#configure
Step 3
controller fabric plane 0 shut
Example:
RP/0/RP1/CPU0:router(admin-config)# controller
fabric plane 0 shut
Step 4
commit
Example:
RP/0/RP1/CPU0:router(admin-config)# commit
Step 5
end
Example:
RP/0/RP1/CPU0:router(admin-config)# end
Step 6
Repeat Step 3 through Step 5 for each fabric plane.
Step 7
show controllers fabric plane all detail
Example:
RP/0/RP1/CPU0:router(admin)# show controllers
fabric plane all detail
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
1-24
configure
controller fabric plane 0 shut
commit
end
Repeat Step 3 through Step 5 for each fabric plane.
show controllers fabric plane all detail
Chapter 1
Migrating to a Cisco CRS-3 Carrier Routing System
Purpose
Places the router in administration EXEC mode.
All commands listed in this procedure should be
entered on the pre-existing single-chassis system.
Places the router in administration configuration mode.
Shuts down the fabric plane in the system.
In a 16-slot CRS-1 router, we have eight fabric nodes,
or CRS-1 Fabric Controller cards, numbered 0/SM0/SP
to 0/SM7/SP. Each CRS-1 Fabric Controller card has
one plane. So for a 16-slot CRS-1 to CRS-3 migration
we will be upgrading one plane at a time for all eight
planes.
For more information, see Cisco IOS XR Getting
Started Guide.
Commits the target configuration to the router running
configuration.
This step brings up the previously shutdown plane,
which is now configured to use the FCC-CRS-3 fabric
card.
Changes the mode from administration configuration mode
to administration EXEC mode.
Displays the administrative and operational status of all
eight fabric planes.
Verify that all fabric planes are administrative state
down.
There are a total of 42 bundles. There are 3 bundles
Note
per LCC. Bundles for LCCs not in service will be
down.
OL-13669-03

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crs-3

Table of Contents