Cisco CRS-1 - Carrier Routing System Router Migration Manual page 32

Information About Migrating to a Cisco CRS-3 Carrier Routing System
upgraded to IOS XR software release 3.8.0 or higher prior to being upgraded to IOS XR software
Release 4.0.X(PX) or be upgraded directly to IOS XR software Release 4.0.X(PX) using Turbo Boot as
described in
Execute the show version command to verify that the CRS-1 to be migrated is running Cisco IOS-XR
Release 4.0.X(PX):
RP/0/RP0/CPU0:router#show version
Mon Mar
Cisco IOS XR Software, Version 4.0.0.T[Default]
Copyright (c) 2010 by Cisco Systems, Inc.
ROM: System Bootstrap, Version 1.304(20091103:191235) [CRS-1 ROMMON],
• Next, execute the show platform command to verify that all Fabric cards are operational (i.e. State
is IOS-XR RUN)
RP/0/RP0/CPU0:router(admin)#show platform
Node
<snip>
0/SM0/SP
0/SM1/SP
0/SM2/SP
0/SM3/SP
0/SM4/SP
0/SM5/SP
0/SM6/SP
0/SM7/SP
<snip>
• Next, execute the show controllers fabric plane all command to verify that all Fabric Planes are
UP:
RP/0/RP0/CPU0:router(admin)#show controllers fabric plane all
<snip>
Plane
Id
---------------------------------------------
0
1
2
3
4
5
6
7
Note
Cisco CRS-1 Carrier Routing System to Cisco CRS-3 Carrier Routing System Migration Guide
1-22
Appendix A, "Turbo Boot
1 06:18:22.261 UTC
Type
FC/S(SP)
FC/S(SP)
FC/S(SP)
FC/S(SP)
FC/S(SP)
FC/S(SP)
FC/S(SP)
FC/S(SP)
Admin Oper up->dn
State State counter
UP UP 0
UP UP 0
UP UP 0
UP UP 0
UP UP 0
UP UP 0
UP UP 0
UP UP 0
The up->down counter records the number of times the plane has flapped between UP and
DOWN. Similarly, up->mcast_Down counter records the number of plane transitions between
MCAST_DOWN and UP]
Chapter 1 Migrating to a Cisco CRS-3 Carrier Routing System
Procedure,".
PLIM State
N/A IOS XR RUN
N/A IOS XR RUN
N/A IOS XR RUN
N/A IOS XR RUN
N/A IOS XR RUN
N/A IOS XR RUN
N/A IOS XR RUN
N/A IOS XR RUN
up->mcast
counter
0
0
0
0
0
0
0
0
Config State
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
PWR,NSHUT,MON
OL-13669-03