Displaying Interface Information - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Fibre Channel Interfaces
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 12-5
Definition
Standard transmitters defined in the GBIC specifications
CWDM-1530
CWDM-1550
CWDM-1570
CWDM-1590
CWDM-1610

Displaying Interface Information

The show interface command is invoked from the EXEC mode and displays the interface
configurations. Without any arguments, this command displays the information for all the configured
interfaces in the switch. See Examples
Example 12-3 Display All Interfaces
switch# show interface
fc1/1 is up
. . .
fc1/9 is trunking
Cisco MDS 9000 Family CLI Configuration Guide
12-20
SFP Transmitter Acronym Definitions (continued)
Hardware is Fibre Channel, SFP is short wave laser
Port WWN is 20:0b:00:05:30:00:8d:de
Admin port mode is F
Port mode is F, FCID is 0x610000
Port vsan is 2
Speed is 2 Gbps
Transmit B2B Credit is 3
Receive B2B Credit is 16
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
134 frames input, 8468 bytes
0 discards, 0 errors
0 CRC, 0 unknown class
0 too long, 0 too short
154 frames output, 46072 bytes
0 discards, 0 errors
1 input OLS, 1 LRR, 0 NOS, 0 loop inits
1 output OLS, 0 LRR, 1 NOS, 0 loop inits
16 receive B2B credit remaining
3 transmit B2B credit remaining.
Hardware is Fibre Channel, SFP is long wave laser cost reduced
Port WWN is 20:09:00:05:30:00:97:9e
Peer port WWN is 20:0b:00:0b:5f:a3:cc:00
Admin port mode is E, trunk mode is on
Port mode is TE
Port vsan is 100
Speed is 2 Gbps
Transmit B2B Credit is 255
Receive B2B Credit is 255
Receive data field Size is 2112
Beacon is turned off
Trunk vsans (admin allowed and active) (1,100,3000)
Acronym
c1530
c1550
c1570
c1590
c1610
12-3 to 12-10.
Chapter 12 Configuring Interfaces
OL-16184-01, Cisco MDS SAN-OS Release 3.x