S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Reason Code (long version)
Link failure or not connected
SFP not present
Reconfigure fabric in progress The fabric is currently being reconfigured.
FC redirect failure
No port activation license
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Reason Codes for Nonoperational States
The physical layer link is not operational.
The small form-factor pluggable (SFP) hardware is not
The physical layer link is operational and the protocol
initialization is in progress.
The Cisco SAN-OS software waits for the specified
R_A_TOV time before retrying initialization.
The interface VSAN is deleted or is in a suspended
To make the interface operational, assign that port to a
configured and active VSAN.
A hardware failure is detected.
Error conditions require administrative attention.
Interfaces may be error-disabled for various reasons.
Incompatible buffer-to-buffer credit configuration.
To make the interface operational, you must first fix the
error conditions causing this state; and next,
administratively shut down or enable the interface.
A port is isolated because a Fibre Channel redirect is
unable to program routes.
A port is not active because it does not have a port
A port is isolated because SDM is unable to program
Cisco MDS 9000 Family CLI Configuration Guide
Fibre Channel Interfaces