Viewing Network Interface Information - HP StoreAll 9730 Administrator's Manual

ibrix_nic -d -n eth3 -h s1.hp.com,s2.hp.com

Viewing network interface information

Executing the ibrix_nic command with no arguments lists all interfaces on all file serving nodes.
Include the -h option to list interfaces on specific hosts.
ibrix_nic -l -h HOSTLIST
The following table describes the fields in the output.
Field
BACKUP HOST
BACKUP-IF
HOST
IFNAME
IP_ADDRESS
LINKMON
MAC_ADDR
ROUTE
STATE
TYPE
When ibrix_nic is used with the -i option, it reports detailed information about the interfaces.
Use the -h option to limit the output to specific hosts. Use the -n option to view information for a
specific interface.
ibrix_nic -i [-h HOSTLIST] [-n NAME]
134 Maintaining the system
Description
File serving node for the standby network interface.
Standby network interface.
File serving node.
Network interface on this file serving node.
IP address of this NIC.
Whether monitoring is on for this NIC.
MAC address of this NIC.
IP address in routing table used by this NIC.
Network interface state.
Network type (cluster or user).