Default Settings - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Number of sWWN deny
...
To verify the status of the active database and the auto-learning configuration, use the show
port-security status command (see
Example 37-10 Displays the Port Security Status
switch# show port-security status
Fabric Distribution Enabled
VSAN 1 :No Active database, learning is disabled, Session Lock Taken
VSAN 2 :No Active database, learning is disabled, Session Lock Taken
...
The show port-security command displays the previous 100 violations by default (see
Example 37-11 Displays the Violations in the Port Security Database
switch# show port-security violations
------------------------------------------------------------------------------------------
VSAN
------------------------------------------------------------------------------------------
1
1
2
[Total 2 entries]
The show port-security command issued with the last number option displays only the specified
number of entries that appear first.
Default Settings
Table 37-6
Table 37-5
Parameters
Auto-learn
Port security
Distribution
Table 37-6
Parameters
Auto-learn
Cisco MDS 9000 Family CLI Configuration Guide
37-20
: 0
Interface Logging-in Entity
fc1/13 21:00:00:e0:8b:06:d9:1d(pwwn)
20:00:00:e0:8b:06:d9:1d(nwwn)
fc1/12 50:06:04:82:bc:01:c3:84(pwwn)
50:06:04:82:bc:01:c3:84(nwwn)
port-channel 1 20:00:00:05:30:00:95:de(swwn)
lists the default settings for all port security features in any switch.
Default Security Settings
Default
Enabled if port security is enabled.
Disabled.
Disabled.
Note
Default Security Settings
Default
Enabled if port security is enabled.
Example 37-10).
Enabling distribution enables it on all VSANs in the switch.
Chapter 37 Configuring Port Security
Example
Last-Time [Repeat count]
Jul 9 08:32:20 2003
Jul 9 08:32:20 2003
Jul 9 08:32:40 2003
OL-16184-01, Cisco MDS SAN-OS Release 3.x
37-11).
[20]
[1]
[1]