Making A Port Eligible For A License; Acquiring A License For A Port - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Chapter 4 On-Demand Port Activation Licensing
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
•

Making a Port Eligible for a License

By default, all ports are eligible to receive a license. However, if a port has already been made ineligible
and you prefer to activate it, then you must make that port eligible by using the port-license command.
To make a port eligible to acquire a license, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# interface fc1/1
switch(config-if)#
Step 3
switch(config-if)# port-license
switch(config-if)# no port-license

Acquiring a License for a Port

If you do not prefer to accept the default on-demand port license assignments, you will need to first
acquire licenses for ports to which you want to move the license.
To acquire a license for a port, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# interface fc1/1
switch(config-if)#
Step 3
switch(config-if)# port-license acquire
switch(config-if)# no port-license
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Moving Licenses Among Ports, page 4-12
Configuring Port Activation Licenses
Purpose
Enters configuration mode.
Specifies the port interface that you want to make
eligible for a license.
The name of the port depends on the switch
Note
you are using. See
Conventions" section on page 4-2
information on port names.
Makes the port eligible to acquire a license.
Removes a license from a port if it already has been
assigned, and also makes the port ineligible to
acquire a license.
Note You can remove licenses only from ports
that are not in an administrative shutdown
state.
Purpose
Enters configuration mode.
Specifies the port interface for which you want to
acquire a license.
The name of the port depends on the switch
Note
you are using. See
Conventions" section on page 4-2
information on port names.
Grants a license to a port or range of ports.
Removes a license from a port or range of ports.
Cisco MDS 9000 Family CLI Configuration Guide
"Port-Naming
for
"Port-Naming
for
4-11