NTP Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command
Step 3
switch(config)# ntp peer NtpPeer
Step 4
switch(config)# exit
switch#
Step 5
switch# copy running-config startup-config
Step 6
switch# show ntp peers
--------------------------------------------
Peer IP Address
--------------------------------------------
NtpPeer
NtpServer
Cisco MDS 9000 Family CLI Configuration Guide
5-22
Purpose
Forms a peer association with a peer. You can
specify multiple associations.
Returns to EXEC mode.
Saves your configuration changes to NVRAM.
Tip
Displays the configured server and peer
associations.
Serv/Peer
Peer (configured)
Server (configured)
Chapter 5
Initial Configuration
This is one instance where you can save
the configuration as a result of an NTP
configuration change. You can issue this
command at any time.
OL-16184-01, Cisco MDS SAN-OS Release 3.x