Verifying Cfs Merge Status - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Chapter 6 Using the CFS Infrastructure
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
In case of a successful merge, the merged database is distributed to all switches in the combined fabric
and the entire new fabric remains in a consistent state. You can recover from a merge failure by starting
a distribution from any of the switches in the new fabric. This distribution restores all peers in the fabric
to the same configuration database.

Verifying CFS Merge Status

The show cfs merge status name command displays the merge status for a given application. The
following example displays the output for an application distributing in logical scope. It shows the merge
status in all valid VSANs on the switch. The command output shows the merge status as one of the
following:
switches in the fabric are shown under the local fabric. In case of a merge failure or a merge in progress,
the local fabric and the remote fabric involved in the merge are indicated separately. The application
server in each fabric that is mainly responsible for the merge is indicated by the term
switch# show cfs merge status name port-security
Logical [VSAN 1] Merge Status: Failed
Local Fabric
----------------------------------------------------------------
Domain Switch WWN
----------------------------------------------------------------
238
Remote Fabric
----------------------------------------------------------------
Domain Switch WWN
----------------------------------------------------------------
236
Logical [VSAN 2] Merge Status: Success
Local Fabric
----------------------------------------------------------------
Domain Switch WWN
----------------------------------------------------------------
211
1
Logical [VSAN 3] Merge Status: Success
Local Fabric
----------------------------------------------------------------
Domain Switch WWN
----------------------------------------------------------------
221
103
The following example of the show cfs merge status name command output displays an application
using the physical scope with a merge failure. The command uses the specified application name to
display the merge status based on the application scope.
switch# show cfs merge status name ntp
Physical
Local Fabric
---------------------------------------------------------
Switch WWN
---------------------------------------------------------
20:00:00:05:30:00:6b:9e
Remote Fabric
OL-16184-01, Cisco MDS SAN-OS Release 3.x
or
Success, waiting,
20:00:00:05:30:00:6b:9e
20:00:00:0e:d7:00:3c:9e
20:00:00:05:30:00:6b:9e
20:00:00:0e:d7:00:3c:9e
20:00:00:05:30:00:6b:9e
20:00:00:0e:d7:00:3c:9e
Merge Status: Failed
IP Address
10.76.100.167
or . In case of a successful merge, all the
Failure In Progress
IP Address
10.76.100.167 [Merge Master]
IP Address
10.76.100.169 [Merge Master]
IP Address
10.76.100.167 [Merge Master]
10.76.100.169
IP Address
10.76.100.167 [Merge Master]
10.76.100.169
[Merge Master]
Cisco MDS 9000 Family CLI Configuration Guide
CFS Merge Support
.
Merge Master
6-9