HP Cisco MDS 9020 - Fabric Switch Configuration Manual page 53

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
New and Changed Information
This document provides release-specific information for each new and changed feature in the Cisco
MDS SAN-OS Release 3.x software. The Cisco MDS 9000 Family CLI Configuration Guide is updated
to address each new and changed feature in the Cisco MDS SAN-OS Release 3.x software. The latest
version of this document is available at the following Cisco Systems website:
http://www.cisco.com/en/US/products/ps5989/products_installation_and_configuration_guides_list.ht
ml
The configuration guides created for earlier releases are also listed at the aforementioned website. Each
Tip
guide addresses the features introduced in or available in those releases. Select and view the
configuration guide that pertains to the software installed in your switch.
To check for additional information about Cisco MDS SAN-OS Release 3.x, refer to the Cisco MDS
9000 Family Release Notes available at the following Cisco Systems website:
http://www.cisco.com/en/US/products/hw/ps4159/ps4358/prod_release_notes_list.html
Table 1-1
Guide, Release 3.x, and tells you where they are documented. The table includes a brief description of
each new feature and the release in which the change occurred.
Table 1-1 New and Changed Features for Release 3.x
Feature
First and Last Core
Common Information
Model
FlexAttach Virtual
pWWN
IP Network Simulator
About SAN Ext Tuner
OL-16184-01, Cisco MDS SAN-OS Release 3.x
summarizes the new and changed features for the Cisco MDS 9000 Family CLI Configuration
Description
Added updates.on First and Last core commands
and Verification.
Added commands for displaying Common
Information Model.
New chapter added for this new feature.
Added a note on IP Network Simulator support
for Multiservice Module (MSM) and the
Multiservice Modular Switch.
Added a note on SAN support for Multiservice
Module (MSM) and the Multiservice Modular
Switch.
Changed
in
Release Where Documented
3.3(1a) Chapter 29, "Advanced Features
and Concepts"
3.3(1a) Chapter 59, "Monitoring System
Processes and Logs"
3.3(1a) Chapter 14, "Configuring
FlexAttach Virtual pWWN"
3.3(1a) Chapter 58, "Troubleshooting Your
Fabric"
3.3(1a) Chapter 41, "Configuring the SAN
Extension Tuner"
Cisco MDS 9000 Family CLI Configuration Guide
liii