Managing Configuration Files; Displaying Configuration Files - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Working with Configuration Files
This chapter describes how to initially configure switches using the configuration files so they can be
accessed by other devices. This chapter includes the following sections:
•
•
•

Managing Configuration Files

Configuration files can contain some or all of the commands needed to configure one or more switches.
For example, you might want to download the same configuration file to several switches that have the
same hardware configuration so that they have identical module and port configurations.
This section describes how to work with configuration files and has the following topics:
•
•
•
•
•
•
•
•
•
•

Displaying Configuration Files

Use the show running-config command to view the running configuration file.
switch# show running-config
Building Configuration ...
interface port-channel 98
interface fc1/1
interface fc1/2
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Managing Configuration Files, page 8-1
Accessing File Systems on the Standby Supervisor Module, page 8-8
Deleting Configuration Files, page 8-8
Displaying Configuration Files, page 8-1
Downloading Configuration Files to the Switch, page 8-2
Saving Configuration Files to an External Device, page 8-3
Saving the Running Configuration, page 8-4
Saving Startup Configurations in the Fabric, page 8-4
Unlocking the Startup Configuration File, page 8-5
Copying Configuration Files, page 8-5
Backing UpConfiguration Files, page 8-6
Rolling Back to a Previous Configuration, page 8-7
Restoring the Configured Redundancy Mode, page 8-7
8
C H A P T E R
Cisco MDS 9000 Family CLI Configuration Guide
8-1