HP Cisco MDS 9020 - Fabric Switch Configuration Manual page 223

Chapter 7 Software Images
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
15944704 Apr 06 16:46:04 2005 m9500-sf1ek9-kickstart-mz.2.1.1a.bin
48063243 Mar 21 15:34:46 2005 m9500-sf1ek9-mz.2.1.1.bin
48036239 Apr 06 16:45:41 2005 m9500-sf1ek9-mz.2.1.1a.bin
Usage for bootflash://sup-local
141066240 bytes used
43493376 bytes free
184559616 bytes total
switch# show module
Mod
---
2
5
6
...
The show module command output shows that the standby supervisor is in slot 6. Use the attach
command to access the supervisor module.
switch# attach module 6
...
switch(standby)# dir bootflash:
12288 Jan 01 00:01:06 1980 lost+found/
14765056 Mar 21 15:35:06 2005 m9500-sf1ek9-kickstart-mz.2.1.1.bin
15944704 Apr 06 16:46:04 2005 m9500-sf1ek9-kickstart-mz.2.1.1a.bin
48063243 Mar 21 15:34:46 2005 m9500-sf1ek9-mz.2.1.1.bin
48036239 Apr 06 16:45:41 2005 m9500-sf1ek9-mz.2.1.1a.bin
Usage for bootflash://sup-local
141066240 bytes used
43493376 bytes free
184559616 bytes total
switch(standby)# exit
switch#
Download a Cisco SAN-OS system image to the active supervisor module bootflash: from a TFTP
Step 4
server, if necessary.
switch# copy tftp://10.16.10.100/system-img bootflash:system-img
Trying to connect to tftp server......
Note
Download a kickstart image to the active supervisor module bootflash: from a TFTP server, if necessary.
Step 5
switch# copy tftp://10.16.10.100/kickstart-img bootflash:kickstart-img
Trying to connect to tftp server......
Perform the upgrade by issuing the install all command.
Step 6
Note
switch# install all system bootflash:system-img kickstart bootflash:kickstart-img
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Ports Module-Type
----- -------------------------------- ------------------ ------------
32 Storage Services Module
0 Supervisor/Fabric-1
0 Supervisor/Fabric-1
Ensure that you download the correct Cisco SAN-OS system image. The system image for
Supervisor-1 modules is different from the system image for Supervisor-2 modules.
On a dual supervisor module switch, always use the default bootflash: in the install all command
syntax. Do not qualify it with "//sup-active/" or "//sup-local". Always use the following syntax:
install all system bootflash:filename kickstart bootflash:filename.
Model Status
DS-X9032-SSM ok
DS-X9530-SF1-K9 active *
DS-X9530-SF1-K9 ha-standby
Cisco MDS 9000 Family CLI Configuration Guide
Automated Upgrades
7-9