Displaying Ha Status Information - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Chapter 9 Configuring High Availability
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
This example output shows that automatic copying is disabled.
switch# show boot auto-copy
Auto-copy feature disabled
Use the show boot auto-copy list command to verify what files are being copied. This example output
displays the image being copied to the standby supervisor module's bootflash. Once this is successful,
the next file will be image2.bin.
This command only displays files on the active supervisor module.
Note
switch# show boot auto-copy list
File: /bootflash:/image1.bin
Bootvar: kickstart
File:/bootflash:/image2.bin
Bootvar: system
This example output displays a typical message when the auto-copy option is disabled or if no files are
copied.
switch# show boot auto-copy list
No file currently being auto-copied

Displaying HA Status Information

Use the show system redundancy status command to view the HA status of the system. Tables
9-3
switch# show system redundancy status
Redundancy mode
---------------
This supervisor (sup-1)
-----------------------
Other supervisor (sup-2)
------------------------
The following conditions identify when automatic synchronization is possible:
•
•
Table 9-1
OL-16184-01, Cisco MDS SAN-OS Release 3.x
explain the possible output values for the redundancy, supervisor, and internal states.
administrative: HA
operational: HA
Redundancy state: Active
Supervisor state: Active
Internal state: Active with HA standby
Redundancy state: Standby
Supervisor state: HA standby
Internal state: HA standby
If the internal state of one supervisor module is
module is , the switch is operationally HA and can do automatic synchronization.
HA-standby
If the internal state of one of the supervisor modules is
synchronization.
lists the possible values for the redundancy states.
Displaying HA Status Information
Active with HA standby
, the switch cannot do automatic
none
Cisco MDS 9000 Family CLI Configuration Guide
to
9-1
and the other supervisor
9-5