HP Cisco MDS 9020 - Fabric Switch Configuration Manual page 233

Chapter 7 Software Images
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Images will be upgraded according to following table:
Module
------
Do you want to continue with the installation (y/n)?
Install is in progress, please wait.
Syncing image bootflash:/boot-1.3.2a to standby.
[####################] 100% -- SUCCESS
Syncing image bootflash:/isan-1.3.2a to standby.
[#
disk may be full).
Install has failed. Return code 0x40930013 (Syncing images to standby failed).
Please identify the cause of the failure, and try 'install all' again.
Dec 15 19:36:42 switch %SYSMGR-3-SERVICE_TERMINATED: Service "installer" (PID 5470) has
finished with error code SYSMGR_EXITCODE_FAILURE_NOCALLHOME (20).
Example 7-9
Example 7-9
install all system bootflash:junk kickstart bootflash:junk
Verifying image bootflash:/junk
[#
type and boot variable).
Compatibility check failed. Return code 0x40930011 (Image verification failed).
Hacienda# Jan 19 00:20:35 Hacienda %SYSMGR-3-SERVICE_TERMINATED: Service "installer" (PID
5664) has finished with error code SYSMGR_EXITCODE_FAILURE_NOCALLHOME (20).
OL-16184-01, Cisco MDS SAN-OS Release 3.x
6 yes non-disruptive
7 yes non-disruptive
8 yes non-disruptive
9 yes disruptive
Image Running-Version
---------- --------------------
1 slc
1 bios v1.1.0(10/24/03)
2 ips
2 bios v1.1.0(10/24/03)
3 slc
3 bios v1.1.0(10/24/03)
4 slc
4 bios v1.1.0(10/24/03)
5 system
5 kickstart
5 bios v1.1.0(10/24/03)
5 loader
6 system
6 kickstart
6 bios v1.1.0(10/24/03)
6 loader
7 slc
7 bios v1.1.0(10/24/03)
8 slc
8 bios v1.1.0(10/24/03)
9 ips
9 bios v1.1.0(10/24/03)
] 0% -- FAIL. Return code 0x401E0008 (request was aborted, standby
displays the install all command output of a failed operation due to an invalid image.
Failed Operation Due to an Invalid Image
] 0% -- FAIL. Return code 0x4045001E (mismatch between actual image
reset
rolling
rolling
rolling Hitless upgrade is not supported
New-Version
--------------------
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.3(1) 1.3(2a)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.2(2) 1.2(2)
1.3(1) 1.3(2a)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.2(2) 1.2(2)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
1.3(1) 1.3(2a)
v1.0.8(08/07/03)
[n] y
Cisco MDS 9000 Family CLI Configuration Guide
Automated Upgrades
Upg-Required
------------
yes
no
yes
no
yes
no
yes
no
yes
yes
no
no
yes
yes
no
no
yes
no
yes
no
yes
no
7-19