Adjusting For Daylight Saving Time Or Summer Time - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Chapter 5 Initial Configuration
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command
Step 4
switch# show clock
Step 5
switch# show run

Adjusting for Daylight Saving Time or Summer Time

You can configure your switch to adjust for daylight saving time (or summer time). By default, MDS
SAN-OS does not automatically adjust for daylight saving time. You must manually configure the switch
to adjust to the daylight saving time.
For example, following U.S. standards, you can have the switch advance the clock one hour at 2:00 a.m.
on the first Sunday in April and move back the clock one hour at 2:00 a.m. on the last Sunday in October.
You can also explicitly specify the start and end dates and times and whether or not the time adjustment
recurs every year.
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Configuring Date, Time, and Time Zone
Purpose
Verifies the time zone configuration.
Displays changes made to the time zone
configuration along with other configuration
information.
Cisco MDS 9000 Family CLI Configuration Guide
5-17