Copying Ficon Configuration Files - HP Cisco MDS 9020 - Fabric Switch Configuration Manual

Chapter 28 Configuring FICON
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
...
Use the show ficon vsan vsan-id file name command to display the contents of a specific FICON
configuration file.
switch# show ficon vsan 2 file name IPLfilea
FICON configuration file IPLFILEA in vsan 2
Description:
Use the show ficon vsan vsan-id file name filename portaddress command to display the FICON
configuration file information for a specific FICON port.
switch# show ficon vsan 2 file name IPLfilea portaddress 3
FICON configuration file IPLFILEA in vsan 2
Description:

Copying FICON Configuration Files

Use the ficon vsan vsan-id copy file existing-file-name save-as-file-name command in EXEC mode to
copy an existing FICON configuration file.
switch# ficon vsan 20 copy file IPL IPL3
You can see the list of existing configuration files by issuing the show ficon vsan vsan-id command.
switch# show ficon vsan 20
Ficon information for VSAN 20
Ficon is online
VSAN is active
Host port control is Enabled
Host offline control is Enabled
User alert mode is Disabled
SNMP port control is Enabled
Host set director timestamp is Enabled
Active=Saved is Enabled
Number of implemented ports are 250
Key Counter is 5
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Prohibited port addresses are 5,250-253,255(0x5,0xfa-0xfd,0xff)
Port address 0(0)
Port name is
Port is not blocked
Prohibited port addresses are 250-253,255(0xfa-0xfd,0xff)
Port address 1(0x1)
Port name is
Port is not blocked
Prohibited port addresses are 250-253,255(0xfa-0xfd,0xff)
Port address 2(0x2)
Port name is
Port is not blocked
Prohibited port addresses are 250-253,255(0xfa-0xfd,0xff)
Port address 3(0x3)
Port name is P3
Port is blocked
Prohibited port addresses are 5,250-253,255(0x5,0xfa-0xfd,0xff)
Port address 3(0x3)
Port name is P3
Port is blocked
Prohibited port addresses are 5,250-253,255(0x5,0xfa-0xfd,0xff)
Cisco MDS 9000 Family CLI Configuration Guide
FICON Configuration Files
28-35