Transfer Unit (Rollers And Drum) Removal; Transfer Unit Removal - Lexmark C720 Service Manual

5024-001

Transfer Unit (Rollers and Drum) Removal

Transfer Unit Removal

1. Open the transfer unit.
2. Remove the set screw BT4X10 (1) from the retainer band on
the transfer unit.
3. Remove the set screw ST3X6 (1) from the fixing metal stop on
the transfer unit.
4. Remove the shaft from the frame installation hole.
a. Lifting the left side, remove the shaft from the hole.
b. Slide the transfer unit to the left end and undo the shaft from
the right side hole.
Note: Install the transfer unit with the fixing metal stop.
Repair Information
4-79