5024-001
Main Motor (MM) / BD Gear Assembly Removal
1. Remove the side cover (R). See
page
4-8, for more information.
2. Remove the top cover assembly. See
Removal" on page
3. Remove the connector to the main motor.
4. Remove all connectors to the IOD2 P.W.B. See
Removal" on page
5. Remove the fixing screws ST3X6 (2) from the IOD2 P.W.B.
base assembly.
6. Remove the IOD2 base assembly.
7. Remove the fixing screws ST3X6 (3) from the BD gear
assembly.
8. Remove the BD gear assembly.
9. Remove the fixing screws BT3X8 (4) from the main motor.
10. Remove the main motor from the BD gear assembly.
4-38
Service Manual
"Side Cover (R) Removal" on
4-12, for more information.
4-28, for more information.
"Top Cover Assembly
"IOD2 P.W.B.