5024-001
Belt Sensor (PBS) Removal
1. Remove the toner cartridges.
2. Remove the OPC belt cartridge.
3. Remove the top cover assembly. See
Removal" on page
4. Remove cleaner cover. See
page
4-21, for more information.
5. Remove drum cleaner.
6. Remove the fixing screws ST3X6 (2) from stay A base.
7. Disconnect the belt sensor.
8. Remove the belt sensor, from the stay A assembly.
4-72
Service Manual
4-12, for more information.
"Cleaner Cover Removal" on
"Top Cover Assembly